100M Ethernet lightning protection control signal lightning
protection network surge protection.
Brief introduction
The control signal network lightning protection dual one protector
uses high quality low capacitance gas discharge tube, TVS and other
devices. It has advantages of small insertion loss, fast response
speed, accurate clamping, low output pressure and so on. It is used
to protect all kinds of voltage connected control signals and
network signal equipment sensitive to electromagnetic interference
and protect sensitive control signal lines. The road is not damaged
by lightning overvoltage, induced overvoltage, over current and
electrostatic discharge.
Product features
1. multi-functional overvoltage protection, lightning and
overpressure are no longer afraid of disasters.
2. the speed of response is 0.001 seconds, and the voltage is
controlled in the range that the equipment can withstand.
3. low output residual pressure to further ensure safety
4. transmission performance, excellent insertion loss, high
transmission frequency and low attenuation coefficient, ensure that
the lightning arrester does not affect the system performance.
Product specification
| Type | TRSS-RJ45 |
| Max continuous operating voltage Uc(VAC) | 5V |
| Nominal discharge current (8/20μS) ln(kA) | 5kA |
| Voltage protection level Up(kV)≤ | 20V |
| Adaptive date transfer rate | 100/1000Mbps |
| Insertion loss | ≤1dB |
| Respeonse Time | ≤1ns |
| Protect network lines | 1~8 |
| Surface Properties | 100x25x25 |
| Line interface | RJ45 |
| Way to lnstall | Series Connection |
Working principle of product
The signal surge protector is connected to the front end of the
protected equipment. When the transmission line is impacted by the
inductive thunder and other transient overvoltage, the impact
current is discharged to the earth through the protection branch of
the surge protector, and the output voltage is placed in the
allowable voltage range of the equipment, thus ensuring the safety
of the operating equipment.
Use of attention
1. when installing, attention should be paid to cables coming in
and out of surge protective devices, so as to avoid the two
coupling of surge.
2. the protected equipment must have good grounding, and the
grounding impedance is in accordance with the relevant national
standards.
3. After correct installation, it can work steadily for a long
time. If it is found that the transmission performance of the
system is reduced or the signal is interrupted due to the cause of
surge protection, it should be maintained or replaced in time.
4. please recognize the interface and connection mode.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
