The PDU cabinet power socket 8 10A GB / Aluminum Alloy Lightning
Overload switch socket
Brief introduction
The special lightning protection socket of the cabinet (PDU power
supply lightning protection socket, power distribution unit) is
specially designed for communication and electronic equipment in
the operation of overvoltage and lightning induction frequently.
Its shape adapts to the standard 19 "internal installation of the
cabinet; the national standard jack fits all kinds of power
pluggers; it is mainly used for a single phase 220V power supply
system." Electronic equipment such as light end machine, PCM,
network switch, computer and precision electronic instrument and
other terminal electronic equipment, such as the last level of
surge protection, this product is widely used in aviation, power
station, ship, communication, electronic information network and
other fields.
Working principle of product
The surge protector of PDU lightning protection socket is very high
when no voltage is needed, which is equivalent to breaking circuit.
When the voltage occurs, the impedance drops to a few Europe, and
the surge current will flow through the surge protector and will
not enter the device. At the same time, because the surge protector
has a small impedance at this time, the voltage on both sides of
the surge is relatively small, and because he is in parallel with
the protected equipment, it prevents the equipment from suffering
from large surge power. Pressure, so as to play the effect of
discharge and pressure limiting.
Product features
1. the inner sleeve is made of all phosphorus bronze strip, with
good conductivity and elasticity.
2. filter circuit can absorb the surge of radio frequency /
electromagnetic interference and output pure power.
3. common mode and differential mode all azimuth protection
Product specification
| Model | TRS-PDU |
| Rated Operating Voitage | UC | 250V～ |
| Voltage protective level | Up(KV)≤ | 1.0 |
| Max discharge current | Imax(KA) | 6 |
Nominal discharge current
| In(KA) | 3 |
| Protection mode | L-N |
| technical parameter | MAX2.5KW-MAX10A |
Working principle of product
The surge protector of PDU lightning protection socket is very high
when no voltage is needed, which is equivalent to breaking circuit.
When the voltage occurs, the impedance drops to a few Europe, and
the surge current will flow through the surge protector and will
not enter the device. At the same time, because the surge protector
has a small impedance at this time, the voltage on both sides of
the surge is relatively small, and because he is in parallel with
the protected equipment, it prevents the equipment from suffering
from large surge power. Pressure, so as to play the effect of
discharge and pressure limiting.
Use of attention
1. this product is limited to indoor dry environment.
2. when multiple plugs are inserted at the same time, the total
power load should not exceed the maximum allowable power.
3. the load power of lightning protection socket should not exceed
the rated power of lightning protection socket.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
Thor is following the international quality system standards, is
ISO 9001 certified and our technical standards are in line with
GB18802.1-2011/IEC61643-1.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
