Industrial control signal, lightning protector, automatic surge
protector, monitoring signal, lightning protector.
Brief introduction
The control signal lightning arrester is designed according to the
standard of IEC and GB. The interface form of the product is a
standard connection column type joint. It can protect 2 special
communication lines. The installation and maintenance is very
convenient. The nominal discharge current can reach 5KA (820 s). It
can fully protect the equipment with the latest semiconductor
device and select the most appropriate limit for different lines.
The voltage is made. The product is applicable to security system,
fire fighting system and industrial system.
Working principle of product
The control signal surge protector is connected to the front end of
the protected equipment. When the transmission line is impacted by
the inductive thunder and other transient overvoltage, the impact
current is discharged to the earth through the protection branch of
the surge protector, and the output voltage is placed in the
allowable voltage range of the equipment, thus ensuring the safety
of the operating
equipment.
Product features
1. the design is novel and small in size.
2. transmission rate is high and the frequency range is large.
3. The core elements are strictly screened and the performance is
superior
Product specification
| Model and specofocation | | TRSS-485 |
| Rated Operating Voltage(V) | Un | DC6 | DC12 | DC24 | DC48 |
| Max continuous operating voltage(V) | Uc | DC9 | DC18 | DC36 | DC75 |
| Voltage protective level(V) | Up〈 | 〈12 | 〈30 | 〈60 | 〈120 |
| Nominal discharge current | In(8/20μS) | 5kA |
| Max discharge current | Imax(8/20μS) | 10kA |
| Response time | ns | 1 |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be customized |
Use of attention
1. identify the input / output interface identifier of the
lightning protector, input the external line and output the
connection device.
2. the grounding of industrial control signal lightning arrester
should be connected to the grounding grid through electronic
switches.
3. when installing, make sure that the "one" screw is installed in
place, making the line combination firmly. If the installation is
finished, the multimeter can be used to test whether the signal
lines are connected. Do not install SPD on live line, otherwise it
may damage SPD and equipment to be protected.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
following the international quality system standards, is ISO 9001
certified and our technical standards are in line with
GB18802.1-2011/IEC61643-1.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
