Surge protectors produced according to international standards

Product description

Surge protector is an electronic device that provides safety protection for various electronic devices, instruments and communication lines. It is mainly used to limit overvoltage and discharge electric current. Surge protector is usually connected with protected equipment. When overvoltage is generated, it can play the role of shunting and voltage limiting. Prevent excessive current and voltage from damaging the equipment.

Product features

1. module is designed and installed conveniently and can be replaced directly.

2. leakage current is small, the response time is fast, and the residual pressure is low

3. indicator device, normal (green) and red (fault).

4. operation, high energy, gap discharge electrode N-PE.

Product specification

1. Rated Operating Voitage(UC):275V

2. Voltage protective level(UP):1.1KV

3. Max discharge current(IMAX):20KA

4. Nominal discharge current(IN):10KA

5. Ressponse time(NS):<25

Working principle of product

1. quasi interface and connection mode;

2. the input / output interface of the quasi lightning arrester is input to the external line and the output device.

3. earth lines should be short, thick and straight, so as to reduce the influence of distributed inductors on the ability of lightning electromagnetic pulse.
The grounding of the

4. lightning arrester shall be connected to the grounding grid through an electronic switch.

Use of attention

Surge protector is an indispensable device in lightning protection of electronic equipment. It used to be called "lightning arrester" or "overvoltage protector". The function of surge protector is to limit the transient overvoltage to the power line and signal transmission line within the electric pressure range that the equipment or system can bear, or to inflow the powerful lightning discharge into the ground. The protected equipment or system is not damaged by impact.

Company profile

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.